Whirlpool YGEW9250SU0 Руководство по эксплуатации и уходу - Страница 18

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и уходу для Сушилка Whirlpool YGEW9250SU0. Whirlpool YGEW9250SU0 40 страниц. Electronic electric dryer

Печатать страницу
Is
the dryer located in a closet?
Closet doors must have ventilation openings at the top and
bottom of the door. The front of the dryer requires a minimum
of 1" (2.5 cm) of airspace, and, for most installations, the rear
of the dryer requires 5" (12.7 cm). See the Installation
Instructions,
•
Has the Air Only temperature
setting been selected?
Select the right cycle for the types of garments being dried.
See "Additional
Features."
•
Is the load too large and heavy to dry quickly?
Separate the load to tumble freely,
Cycle time too short
Excessive Weight Hazard
Use two or more people to move and install dryer.
Failure to do so can result in back or other injury.
•
Is the automatic cycle ending early?
The load may not be contacting
the sensor strips. Level the
dryer.
Change the dryness level setting on Automatic
Cycles.
Increasing or decreasing the dryness level will change the
amount of drying time in a cycle.
Lint on load
•
Is the lint screen clogged?
Clean lint screen. Check for air movement.
Stains on load or drum
Was dryer fabric softener properly used?
Add dryer fabric softener sheets at the beginning of the cycle.
Fabric softener sheets added to a partially dried load can
stain your garments.
Drum stains are caused by dyes in clothing (usually blue
jeans). This will not transfer to other clothing.
Loads are wrinkled
•
Was the load removed from dryer at the end of the cycle?
•
Was the dryer overloaded?
Dry smaller loads that can tumble freely.
Odors
Have you recently been painting,
staining or varnishing in
the area where your dryer is located?
If so, ventilate the area. When the odors or fumes are gone
from the area, rewash and dry the clothing.
•
Is the dryer being used for the first time?
The new electric heating element may have an odor. The odor
will be gone after the first cycle.
ASSISTANCE ORSERVICE
Before calling for assistance or service, please check
"Troubleshooting."
It may save you the cost of a service call. If
you still need help, follow the instructions
below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement
parts
If you need to order replacement parts, we recommend that you
use only FSP ° factory specified parts. These parts will fit right
and work right because they are made with the same precision
used to build every new WHIRLPOOL ® appliance.
To locate FSP replacement
parts in your area:
Call 1-800-807-6777,
or your nearest designated service center.
Our consultants
provide assistance
with:
•
Features and specifications
on our full line of appliances.
•
Use and maintenance procedures.
•
Accessory and repair parts sales.
Referrals to local dealers, repair parts distributors,
and
service companies. Whirlpool Canada LP designated service
technicians are trained to fulfill the product warranty and
provide after-warranty
service anywhere in Canada.
For further assistance
If you need further assistance, you can write to Whirlpool Canada
LP with any questions or concerns at:
Customer Interaction Centre
Whirlpool Canada LP
1901 Minnesota Court
Mississauga,
Ontario L5N 3A7
Please include a daytime phone number in your correspondence.
18