Whirlpool AKR 520 Монтажный лист - Страница 4

Просмотреть онлайн или скачать pdf Монтажный лист для Вентиляционная вытяжка Whirlpool AKR 520. Whirlpool AKR 520 4 страницы.

Печатать страницу

AKR 520

1. Control panel

2. Grease filters (behind the extractor grille)

3. Lighting unit

4. Pull-out steam deflector

REMOVING AND RENEWING OR

CLEANING THE GREASE FILTER

1. Unplug the appliance or switch off the mains

power supply.

2. Pull out the steam deflector.

3. Open the extractor grille.

4. Remove the device securing the grease

filter (a).

5. Remove the dirty grease filter.

6. After the grease filter has been replaced or

cleaned (depending on model), refit the parts

in reverse order, making sure the entire

extraction surface is covered.

FITTING OR RENEWING

THE ACTIVATED CARBON FILTER

1. Unplug the appliance or switch off the mains

power supply.

2. Pull out the steam deflector.

3. Open the extractor grille.

4. Fitting: fit the activated carbon filter over the

extraction grille. The arrow (b) on the tab of

the activated carbon filter should line up with

the arrow on the fan shroud (c).

Turn clockwise (d) until the tab covers the

hole. The pin under the tab will then locate in

the hole to secure the filter.

Removing: release the filter by pulling the

filter tab downwards, then turn the activated

carbon filter anti-clockwise to release it from

its seat.

5. Refit the extraction grille.

REPLACING BULBS

1. Unplug the appliance or switch off the mains

power supply.

2. Pull out the steam deflector.

3. Open the extractor grille.

4. Remove the burn-out bulb.

Use 40W max E14 bulbs only.

5. Refit the extraction grille.

5019 100 75111

PRODUCT DESCRIPTION SHEET

RUS

CONTROL PANEL

A. Light switch.

B. Speed selector switch.

small amount of steam and fumes

medium amount of steam and fumes

large amount of steam and fumes

0 1 2 3