Whirlpool AKR9010/IX Руководство по установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке для Вентиляционная вытяжка Whirlpool AKR9010/IX. Whirlpool AKR9010/IX 15 страниц.

MAINTENANCE

- Use protective gloves.

WARNING:

- Disconnect the appliance from the power supply

GREASE FILTERS

The metal grease filter has an unlimited life and should be cleaned once a month by hand or in a dishwasher at low temperature and

with a short cycle. Cleaning in a dishwasher may cause discolouring of the grease filter, but its filtering efficiency is unaffected.

Pull out the handle to remove the filter.

Wash the filter and leave it to dry, proceeding in reverse order to refit it.

REPLACING HALOGEN LAMPS

The hood is equipped with a lighting system based on LED technology.

The LEDs guarantee an optimum lighting, a duration up to 10 times as long as the traditional lamps and allow to save 90% electrical energy.

For replacement, contact the technical service.

ACTIVE CARBON FILTER (filter hoods only):

The carbon filter must be cleaned once a month in a dishwasher at the highest temperature, using a normal

dishwasher detergent. It is advisable to clean the filter separately.

After cleaning, reactivate the carbon filter by drying it in the oven at 100°C for 10 minutes.

Change the carbon filter every 3 years.

Fitting the carbon filter:

1. Remove the grease filter.

2. Hook the carbon filter firstly to the metal tab at the back on the hood and then fix it at the front with the two

knobs.

3. Refit the grease filter.

GB15