Whirlpool Slide-Out Range Hood Руководство по установке и использованию - Страница 14

Просмотреть онлайн или скачать pdf Руководство по установке и использованию для Вентиляционная вытяжка Whirlpool Slide-Out Range Hood. Whirlpool Slide-Out Range Hood 36 страниц. 30" (76.2 cm) and 36" (91.4 cm) slide-out range hood

Печатать страницу

6. Place charcoal filter into opening, resting the back of the filter

on tabs "A," then clip filter tabs "C" into slots "B."

A. Tab

B. Slot

C. Filter tabs

7. Repeat to install other charcoal filter.

8. Replace metal grease filters. See "Metal Grease Filters"

section.

To Replace Charcoal Filters

1. Turn fan and lights off.

2. Pull out on the range hood screen to expose the filters.

3. Remove the 2 metal grease filters. See "To Remove Metal

Grease Filters" section.

4. Set metal grease filters aside.

5. Remove and discard both charcoal filters.

6. Install replacement charcoal filters by placing charcoal filter

into opening, resting the back of the filter on tabs "A," then

clip filter tabs "C" into slots "B."

7. Replace metal grease filters. See "Metal Grease Filters"

section.

Replacing the Bulb

Turn off the range hood and allow the bulb to cool.

Use a 15-watt fluorescent bulb with 30" (76.2 cm) unit and 18-

watt bulb with 36" (91.4 cm) unit.

1. Disconnect power.

2. Remove the screws above the light cover and set them aside.

3. Pull the light cover forward slightly and then downward to

remove the cover.

4. Replace the light bulb.

5. Lift cover back into position.

6. Replace the screws.

KWVU Model Series

A. Screws

GZ & IH Model Series

A. Screws