Whirlpool WVWA5UC0HN Инструкции по установке и использованию - Страница 10

Просмотреть онлайн или скачать pdf Инструкции по установке и использованию для Вентиляционная вытяжка Whirlpool WVWA5UC0HN. Whirlpool WVWA5UC0HN 28 страниц. 30" and 36" (76.2 and 91.4 cm) wall‑mount canopy range hood

Печатать страницу

2. Secure the bottom of the duct with (2) 4.2 x 8 mm screws.

The range hood is designed to remove smoke, cooking

vapors and odors from the cooktop area. For best results,

start the hood before cooking and allow it to operate several

minutes after the cooking is complete to clear all smoke and

odors from the kitchen.

The hood controls are located on the front side of the canopy.

A. Louver holes (non-vented

[recirculating] installations only)

B. Duct cover

C. Control panel

D. Light switch (ambient lighting)

RANGE HOOD USE

E. Glass canopy

F. Perimetric cover

G. LED lights

H. Metal grease filters (located

behind the perimetric cover)

Complete Installation

1. For non-vented (recirculating) installations only, install

charcoal filters over metal grease filter. See the "Range

Hood Care" section.

2. Install metal filters. See the "Range Hood Care" section.

3. Check the operation of the range hood blower and light.

See the "Range Hood Use" section.

NOTE: To get the most efficient use from your new range hood,

read the "Range Hood Use" section.

Range Hood Controls

A. Blower speed maximum button

B. Blower speed medium button

C. Blower speed minimum button

D. Blower off button

E. On/Off LED task light button

Operating the LED task light

The On/Off light button controls both lights. Press once

for on and again for off.

Operating the blower

The Blower Speed buttons turn the blower on and control the

blower speed and sound level for quiet operation. The speed

can be changed anytime during fan operation by pressing the

desired Blower Speed button.

The Blower Off button turns the blower off.

Operating the Ambient Lighting

The switch controls the ambient lighting.

1. Press to the left to turn Auto On.

2. Press to the right to turn Ambient Lighting On.

3. Press to the center to turn Ambient Lighting or Auto Off.

NOTE: When the Ambient Lighting is placed in the Auto setting,

a sensor will automatically sense if it is dark in the area around

the range hood. The Ambient Lighting will turn on and stay on

until it senses there is enough light in the area around the range

hood, or the Ambient Lighting switch is placed in the on or

off position.