Clare Controls CH-THSTAT-W Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Термостат Clare Controls CH-THSTAT-W. Clare Controls CH-THSTAT-W 15 страниц. Wi-fi thermostat
Также для Clare Controls CH-THSTAT-W: Руководство по установке (10 страниц)

Печатать страницу

Setting the System Mode: Off, Heat, Cool, Auto

Press Mode button to

change system mode

System Mode change screen

Press "DONE" button to select the mode and exit back to the main

thermostat screen or wait for the screen to automatically time out.

System Modes

OFF: System is off. No heating or cooling will come on. If system was on, it will

•

turn off immediately.

HEATING: Only heating will occur.

•

COOLING: Only cooling will occur.

•

AUTO: Heating or cooling will come on according to the heating and cooling

•

setpoints. The system will automatically switch between heating and cooling

modes as needed to maintain the setpoints.

Special Heat Pump Mode: Emergency Heat

EHEAT: An additional system mode, "EHEAT" for Emergency Heat will be

•

displayed if the HVAC system type is set to Heat Pump. If there is a compressor

failure with the Heat Pump system, setting the mode to EHEAT will allow the

supplemental Aux heat to come on first whenever there is a call for heating. It

also disables the compressor output to prevent further damage to the HVAC

system.

Doc ID 2014-05-223 • Rev 02

4:30 PM

Sys Off

HEAT

AUTO

MODE

FAN

SYSTEM MODE

OFF

HEATING

COOLING

AUTO

Done

MODE

64H

82C

HOLD

Press the

UP or

DOWN buttons

MODE button

to select the

desired system

mode

Page 3