CalderaSpas Olympia Руководство пользователя - Страница 11
Просмотреть онлайн или скачать pdf Руководство пользователя для Горячая ванна CalderaSpas Olympia. CalderaSpas Olympia 16 страниц. Portable spa
Печатать страницу
3 days a week
Once a week
IMPORTANT:
KEEP SAND AND GRIT OUT OF SPA
Sand and grit will damage or impair the
performance of your spa's components.
Use caution to avoid tracking debris into
the spa. Remove sand or grit from the
spa as soon as you notice it is present.
A spa vacuum designed for this purpose
is available from your Caldera dealer.
Four to six weeks
Two months (heavy usage)
Five months (light usage)
Six months
MAINTENANCE
IMPORTANT MAINTENANCE PROCEDURES
your spa be sure to follow the "START-UP" instructions on page 4.
clear stain every six months.
Check water level. Make certain water level is 1 inch above the
highest jet.
Check and adjust Chlorine level to 1.0 to 3.0 ppm if Chlorine is
used as sanitizer. If Bromine is used, check weekly.
Test the spa water using test strips or test kit.
Adjust pH and total alkalinity - refer to pH and total alkalinity on
label of SPA UP and SPA DOWN.
Check and adjust Bromine level to 1.0 to 3.0 ppm if Bromine is
used as sanitizer. If Chlorine is used, check three times a week.
Add 1 ounce of SPA DEFENDER per 400 gallons of water to
prevent calcium build up.
Shock treat with 2 ounces of RENEW, a non-chlorine shock.
Check and clean the skimmer basket and weir to insure proper
filter flow, remove leaves, foreign matter and debris.
Check spa cover. Make certain cover is positioned properly and
tie-down straps are fastened/locked. Be sure water and snow are
swept off or kept from accumulating or puddling on the cover.
Inspect and clean the spa filter cartridge. It is very important to
maintain your spa filter cartridge and keep it clean and free of particles
which can restrict water flow. If the filter is not cleaned on a regular
basis, the filter may clog and restrict water flow, which causes improp-
er filtration and poor jet performance. See " FILTER CARTRIDGE
REMOVAL AND CLEANING INSTRUCTIONS" on page 10.
Drain your spa. Follow the procedures outlined in "DRAINING
YOUR SPA" on page 10. Clean the spa with "Spa Multi-Purpose
Cleaner" and then polish with a silicone sealant polish. When refilling
Clean and seal your spa skirt. The spa skirt is coated with a
tinted stain for protection and to enhance the beauty of the natural
redwood. Like all wood products, prolonged exposure to the
weather and climate conditions will cause the redwood to discolor
or fade. To maintain the rich finish, apply a good quality tinted or
Note: The stain used by Caldera is available from your Caldera
dealer.
Page 9