AER Domino2 Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Музыкальное оборудование AER Domino2. AER Domino2 11 страниц.

Domino

-7-

• Stereo-Simulation

The DOMINO is mono! Thus you find the same

effect signal on "R-Out" and "L-Out". These out-

puts are designed to connect AER active fullrange

systems to (AG8, CX8, AS Q8, AS 281) and adjust the

overall volume by the pre master independend from

the Domino volume. If you switch on the stereo

simulation now a more or less stereo like, broader

sound is generated. On stage, Domino as monitor

the sound stays unchanged.

• Insert

The insert loop is an input and output on a stereo

socket to link different effect devices (EQs, com-

pressors...) in serial mode with:

tip = send –> output and

ring = return –> input.

You can also use this insert as additional line output

separately or additional line input separately or to

link several AER-amps with insert function. (Domino,

Compact classic, AG8) For each function you need a

special cable accordingly. For the special AER link

function refer to see appd. 2.

Link mode secures that all signals of all connected

AER-amplifiers are audible on every connected amp

even with different effect settings without feed-

back. The only implication is, gains are depending

on each other. However linked amps in conjunction

with an active AER fullrange system work as a

complete reinforcement/monitor system easy to be

operated from the stage.

OK? We hope you enjoy your DOMINO!