Caldwell 758995 Инструкция - Страница 3

Просмотреть онлайн или скачать pdf Инструкция для Спорт и активный отдых Caldwell 758995. Caldwell 758995 8 страниц.

ASSEMBLY INSTRUCTIONS:

Thank you for purchasing a Caldwell Magnum Rifle Swinger. Assembly of

this product is very easy and requires only a 16mm and 17mm wrench. The

product should be assembled as shown. (See exploded view on next page)

ASSEMBLY STEPS:

1. Assemble four of the steel Bars into the molded Elbows (As shown on

pg 4), forming two leg sections. Be sure to fully seat them into the

Elbow Sockets.

2. Push the remaining Bar into one of the Elbows until it is fully seated.

3. Slide one of the Target Centering Tubes over the Bar, followed by the

Target Mounting Block and then the second Tube.

4. Press the second complete leg section onto the bar, completing

the Frame.

5. Using the bolts, washers and nuts, attach the Target Plate to the

Mounting Block.

NOTE: The bolts should be aligned so that the washer and lock nut

are on the BACK SIDE of the Target Mounting Block, opposite

from the Target Plate.

6. Tighten the bolts using a 16mm and 17mm wrench until they are tight.

7. Slide the molded Stake Brackets onto the legs as shown

8. Insert the Stakes into the Stake Brackets