Clarion CZ702A Руководство пользователя - Страница 13
Просмотреть онлайн или скачать pdf Руководство пользователя для Автомобильный приемник Clarion CZ702A. Clarion CZ702A 19 страниц. Bluetooth cd/usb/mp3/wma receiver
Печатать страницу
AUX Operations
Press [SRC /
] button on the panel to select
"AUX".
AUX is just for audio content with 3.5mm Jack
connector plugged into audio-in socket on the
front panel.
AUX Input sensitivity setting
1. Press and hold the [DISP] button (1 sec.).
2. Turn the [VOLUME] knob to select "AUX
SENS".
3. If the output level of connected external
audio player is "HIGH", rotate [VOLUME]
knob and choose "LOW". And if the output
level is "LOW", choose "HIGH".
6. TROUBLE SHOOTING
GENERAL
Problem
Cause
Unit fuse blown.
Unit can not power on.
Car battery fuse blown.
Unit can not power on.
Nothing happens
when buttons are
The microprocessor has
pressed.
malfunctioned due to noise, etc.
Display is not
accurate.
Improper audio output connection. Check wiring and correct.
Volume set too low.
Speakers damaged.
No/low audio output.
Heavily biased volume balance.
Speaker wiring is in contact with
metal part of car.
Non-standard disc used.
Speaker power rating does not
Poor sound quality or
match unit.
distortion.
Wrong connections.
Speaker is shorted.
Unit resets itself when
Incorrect connection between ACC
engine is off.
and Battery.
DISC Player
Problem
Cause
Another disc is already loaded.
Disc cannot be
There is an object install installed
loaded.
the unit.
Compact disc is dirty.
Sound skips or is
Compact disc is heavily scratched
noisy.
or warped.
Sound is bad when
Condensation may form on the internal
power is first turned
lens when the car is parked in a
humid place.
on.
Measure
Replace with new fuse of correct rating.
Replace with new fuse of correct rating.
Turn off the power and remove the DCP.
Press the [RESET] button with a thin rod.
Note:
When the [RESET] button is pressed, turn off
the ACC power.*
* When the [RESET] button is pressed,
frequencies of radio stations, titles, etc. stored
in memory are cleared.
Increase volume level.
Replace speakers.
Adjust the channel balance to center position.
Insulate all speaker wiring connections.
Use a standard disc.
Replace speakers.
Check wiring and correct.
Check wiring and correct.
Check wiring and correct.
Measure
Eject the disc before loading the new one.
Remove the object inside the unit.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no
scratches.
Let dry for about 1 hour with power on.
CZ702A
13