ABB Relion 611 Series Краткое руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Блок управления ABB Relion 611 Series. ABB Relion 611 Series 4 страницы.
Также для ABB Relion 611 Series: Руководство по быстрой установке (20 страниц)
Q U I C K S TA R T G U I D E R E L I O N ® 6 1 1 S E R I E S
—
Using the Web HMI
Connect PC to the IED front communication port with
a Ethernet cable. Enter the IP address 192.168.0.254 in
a web browser. For full access, login with administrator
username and password. The username is "ADMINISTRATOR"
and the default password is "remote0004".
Changing the overcurrent start value via WebHMI
It is important to enable writing to the IED. If write is
disabled it is not possible to change settings.
Click settings in the left menu bar, then go to
Settings → Current Protection → PHLPTOC1 → Start
—
Changing the overcurrent start value via WebHMI
—
Input and output signal configuration
After you have changed the
"Write to IED"
that opens.
Input and output signal configuration
Click the corresponding area to view a specific logical
group, and then the switch groups included in the logical
group are listed in the Function View page. Click
"Overview"
Settings →
value.
start value
and click
"Commit"
in the notification bar
to go back to the overview page.
3
parameter, click