ALcom CL-3350 INF Руководство пользователя - Страница 18

Просмотреть онлайн или скачать pdf Руководство пользователя для Беспроводной телефон ALcom CL-3350 INF. ALcom CL-3350 INF 18 страниц. Digital enhanced cordless telephone with caller id function

Печатать страницу

Battery Level Indicator

The

icon is continuously displayed at the

top right corner of the LCD window. The

icon shows the level of battery power. The

more bars you see, the more power you have

left.

When the battery is too weak for the phone to

operate, the handset will automatically turn off.

Place the handset

Key Lock

If you turn this feature on, all buttons except

for the

button will be locked and will not

function.

You can answer incoming calls or intercom

calls by using any buttons on the phone. But

when you hang up, the phone returns to the

lock mode. This feature is useful to avoid

pressing buttons by mistake.

1. To turn the feature on, press the

Basic Function

on the base to charge the handset battery.

Full

Flat

button briefly and the

icon appears

in the LCD window.

2. To turn the feature off, press the

button briefly and the

icon

disappears from the LCD window.

Notes:

If a power failure occurs, the Key Lock

feature is automatically cancelled.

Do not hold the

button for more than 3

seconds, or the handset will be turned o f f .

Smart Dialing

With the Smart Dial feature, your phone displays

the full phone number when you enter the first

digit(s) of the number provided that the number

is currently stored in your phone's memory (for

example, stored in the phonebook, received or

dialed recently).

To place a call using the smart dial feature:

1. In Standby mode, enter the first digit(s) of

the desired phone number.

Result:

The phone searches for the matching

phone number from memory (in the

order of outgoing calls, Phonebook,

incoming calls), then displays the first

available number. Numbers blink

except for the part of the number you

entered.

2. If the number is not the one you want,

enter the remaining digits until you

see the desired number.

Out of Range Indication

If the handset is too far from the registered

base, the handset cannot properly engage the

telephone line. The

icon at the top left of

the LCD window blinks to warn you and the

signal strength indication bars next to the

icon disappear.

This icon blinks

when the handset

is out of range.

3. Press the

button to dial the number

displayed. Or press the

button to

C/R

exit this smart dial mode.

You can select to enable or disable the

Smart

Dialing

feature. To change the setting:

1. Press the

button.

2. Press the

button to choose

, then press the

button.

Result:

The current setting is displayed.

3. Press the

button to choose

To enable this feature, select

4. Press the

button to save the

selection.

If you carry the handset too far from the base

unit during a call, the telephone line might be

disconnected and the handset returns to

Standby mode. Check if there is noise or

static. If so, move the handset closer to the

base station.

Basic Function