ALcom AT6085 Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Телефон ALcom AT6085. ALcom AT6085 12 страниц.

transfer calls from that different model phone to the model referred in this manual

and intercom during may not be possible in certain cases.

• If the paging number is set, Anti-steal dialing function will not work.

• This feature will work only on regular PSTN networks.

• Any special services starting with " * " offered by your Telephone company may not

function properly. Please deactivate Call Transfer function before using those

special services.

( Example Phone banking service which prompts you to press " * " followed by some number for

choosing language etc.)

ANTI-STEAL DIALING FUNCTION

1. In on-hook state, press and hold #/= key for 3 seconds, LCD displays SPI ON

2. Press H.F. key twice and then

3. Press and hold #/= key for 3 seconds again, LCD displays SPI OFF,

When the anti-steal is set to ON, users who want to dial using an extension to dial via the same

line will hear a "DI-DI, DI-DI" beep continuously and will not be allowed to make a call.

NOTE: If page number is set this function will not work.

SETTING RINGING TONE AND ADJUST RINGING VOLUME

There are 16 kinds of ringing tones and ringing OFF for selection:

1. In on-hook state, press RING key, LCD displays ring 02 db8

2. Press RING to select the desired ringing or set ring OFF.

3. Press UP/+ or DOWN/- key to set ringing volume.

4. Press SET to confirm and exit.

NOTE: The volume ranges from 1db-8db, with 8db being the loudest. Ring OFF is "Do Not

Disturb" mode. If the phone is set to this mode, the telephone will not ring when there is an

incoming call.

ADJUST HANDSFREE VOLUME

In hands free mode, press UP/+ or DOWN/- to adjust the handsfree volume, LCD displays the

volume level and there are a total of 3 levels.

1. In on-hook state, press and hold */. key for 3 seconds, LCD displays P, then dialing mode is

set as Pulse.

2. Press H.F. key twice and hold */. key for 3 seconds again, LCD displays T then dialing mode

is set as Tone.