Direct Healthcare Group GATE Bure XL Руководство пользователя - Страница 5
Просмотреть онлайн или скачать pdf Руководство пользователя для Помощь в передвижении Direct Healthcare Group GATE Bure XL. Direct Healthcare Group GATE Bure XL 8 страниц.
Печатать страницу
7. Maintenance
Recommended at least once per year.
Check that
General
The walker feels firm/free from play.
The walker does not rattle during manoeuvres.
The walker is level and all of its castors are in contact with
the floor.
The walker is not dirty.
Armrests
Armrests are intact and clean.
Armrest widening is functional.
Handle
Grips are not damaged/dirty.
Handle adjustment is functional.
Height adjustment
Raising and lowering are functional.
The walker feels stable at maximum settings.
There is no play between the vertical frame and bottom
frame.
Height adjustment clamps lock.
The electric actuator fitting must be free from play.
Height adjustment via remote control is functional. The
electric actuator must run smoothly at a constant speed.
Frame parts
There is no mechanical damage.
There are no scratches.
End plugs/lower frame fitted.
Castors/brakes
Castors roll easily/tread not damaged.
The castors are firmly fastened to the lower frame.
Castor brakes functional on all castors.
Handbrake functional.
U S ER MANUA L
Action
Clean with lukewarm soap solution or
alcohol-based cleaning agent (no petroleum products).
Clean; replace if damaged.
Fit lock screws/plates as required
Clean with lukewarm soap solution (no petroleum
products).
Replace handle grips.
Fit lock screws/plates as required.
Fit new guide sleeves (in frame) or end plugs (in chrome
tubes) as required.
Tighten all lock bolts.
Replace clamps.
Tighten the attachment fitting concerned; replace bolts/
lock nuts as necessary.
Check that the battery/remote control/actuator are
connected in accordance with the wiring diagram. Charge
the battery. Contact customer services.
If damage is present, contact GATE's customer services.
Touch up as necessary.
Fit new end plugs.
Clean or replace castors.
NOTE: Castors are always fixed to the lower frame with
thread locker or lock nuts. Do not dismantle the castors;
replace the whole castor assembly instead.
Tighten the castor bolt and fit locking nut or use thread
locker (depends on model).
Replace castor assembly.
Adjust the brake or fit new castors.
G ATE RD .SE
5