AERATE AR1320 Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Очиститель воздуха AERATE AR1320. AERATE AR1320 10 страниц. Cyclone/thunder

Install Pre-ﬁlter

Machine: Switch off purifier, if dust is accumulated, clean it with soft cloth soaked with

clean detergent water, and gently brush the inlet/outlet.

Filters: Filter replacement will be reminded by the inner machine automatically. Pre-filter

can be used for 2800hours, HEPA filter 2900 hours, activated carbon filter for

3000 hours.( Each filter can be used for about 1 year on 8 hour's running average

in account). However, with different using environment of different pollutants,

the cycle may differ. They can be replaced according to the running sounds or

smells changing smell. For new filters, please contact AERATE Service Center.

Remark: UV lamp installed

UV lamp: it can be used for about 2 years, while replacing it, you need to turn off the

machine, remove the UV lamp at 90 degrees rotation, and replace.

Sensor: It is a very sensitive optical sensor. After long time use, dust particles

will be accumulated to the lens surface of sensor. And then lower the sensor's sensitivity.

It is recommended as below pictures showed:

Please wipe the sensor with neutral detergent

Attention: Air purifier must be disconnected with the power supply before cleaning.

Clean with vacuum cleaner or

hot water

Use vacuum cleaner only

Dry in the sun for 1~3 hours