CALEFFI DISCAL 551035A Series Инструкции по монтажу, вводу в эксплуатацию и техническому обслуживанию - Страница 2

Просмотреть онлайн или скачать pdf Инструкции по монтажу, вводу в эксплуатацию и техническому обслуживанию для Системы фильтрации воды CALEFFI DISCAL 551035A Series. CALEFFI DISCAL 551035A Series 12 страниц. Air separator
Также для CALEFFI DISCAL 551035A Series: Инструкции по монтажу, вводу в эксплуатацию и техническому обслуживанию (12 страниц)

CALEFFI DISCAL 551035A Series Инструкции по монтажу, вводу в эксплуатацию и техническому обслуживанию

Technical specifications

Brass air separator
Materials
- body:
- internal element
(compact and rotating collar versions):
- internal element:
- seal:
- air vent float:
- air vent float linkages:
- air vent float guide pin:
Performance
Suitable fluids:
Max. percentage of glycol:
Max. working pressure:
Temperature range:
Air separation efficiency:
Connections - main:
compact series:
horizontal:
rotating collar version, 5517 series: ¾" and 1" sweat, press and NPT male union
- lay length (press connection):
-
drain:
Steel air separator
Materials
- body:
- internal element:
- seal:
- air vent float:
- air vent float linkages:
- air vent float guide pin:
Performance
Suitable fluids:
Max. percentage of glycol:
Max. working pressure:
Temperature range:
Air separation efficiency:
Connections - flanged:
- drain pipe:
Agency Approval
NA551 series is designed and built in accordance with Section VIII, Division 1 of the ASME Boiler
and Pressure Vessel Code and tagged and registered with the National Board of Boiler and
Pressure Vessel Inspector, and CRN registered (12" pending, contact Caleffi).
3/4" , 1" , 1-1/4",
1" , 1-1/4",
1",1-1/4",1-1/2"
5517 series:
sizes 2-6": 150 psi (10 bar); sizes 8-12": 200 psi (14 bar)
2"– 12" ANSI B16.5 150 CLASS RF
2
304 stainless steel
glass reinforced nylon PA66GF30
peroxide-cured EPDM
stainless steel
stainless steel
water, glycol solution
150 psi (10 bar)
32–250°F (0–120°C)
100% to micro-bubble level
3/4" sweat; 3/4" NPT female
1-1/2"
and 2" NPT female
1-1/2"
and 2"integral sweat
and 2" integral press
see page 4 and 5
1/2"
NPT female
1/2" straight female
epoxy resin painted steel
304 stainless steel
peroxide-cured EPDM
stainless steel
stainless steel
water, glycol solution
32–270°F (0–132°C)
100% to micro-bubble level
sizes 2 - 6 inch: 1" NPT male
sizes 8 - 12 inch: 2" NPT male
brass
PP
50%
PP
50%