ERGO-INNOVATE EI6181 Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стойки и подставки ERGO-INNOVATE EI6181. ERGO-INNOVATE EI6181 12 страниц. Full motion mount

Печатать страницу

3A-3

3A-4

Step 3B

Solid Concrete or Concrete Block Option

WARNING:

● Avoid potential personal injury or property damage! DO NOT over-tighten the lag

screws [A1]. Tighten the lag screws [A1] only until the washers [A2] are pulled ﬁrmly

against the wall plate.

● Ensure the arm assembly/wall plate [05] is securely fastened to the

wall before continuing to the next step.

● Any material covering the wall must not exceed 5/8 in. (16 mm)

● Mount the arm assembly/wall plate [05] directly onto the concrete surface

● Minimum solid concrete thickness: 203 mm (8 in.)

● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)

● Never drill into the mortar between blocks

3B-1

Drill 4 pilot holes using a

13/64 in.(5mm) diameter drill

bit. Make sure the depth is not

less than 2 9/16 in.(65mm).

HEAVY! You may need

assistance with this step.

Install the arm assembly/wall

plate [05] using lag screws [A1]

and washers [A2]. Tighten the

lag screws [A1] only until the

washers [A2] are pulled ﬁrmly

against the wall plate.

Position the arm assembly/wall

plate [05] at your desired

height, level the wall plate and

mark the pilot hole locations.

2 9/16 in.(65mm)

13/64 in.(ø5mm)

33/64 in.(13mm)

Socket Wrench

Wall Anchor

HEAVY! You may need

assistance with this step.