Xerox 2101 Информация о выпуске для клиентов - Страница 3

Просмотреть онлайн или скачать pdf Информация о выпуске для клиентов для Принтер Xerox 2101. Xerox 2101 14 страниц. Digital copier/printer
Также для Xerox 2101: Руководство по началу работы (12 страниц), Руководство пользователя (22 страниц)

9. Set the Booklet Back Cover Mode option.

Does not force any back cover mode. The front cover is printed according to

AutoSelect:

Booklet Front Cover Mode, and the remaining pages of the document are printed in order

after that, with no blank pages in between. Depending on where the last pages of the

document fall, the back cover may be printed on both sides, printed on the front side only,

or blank.

Prints the last page of the document on the front of the back cover.

Print On Front Only:

Prints the last page of the document on the back of the back cover.

Print On Back Only:

Prints the last two pages of the document on the front and back of the back

Print Both:

cover.

Leaves the back cover blank on both sides.

Blank:

For all Booklet Back Cover Mode settings except for AutoSelect, blank pages may be

inserted at the end of the booklet's content, depending on the number of pages in the

document. For example, if Booklet Back Cover Mode is set to Print Both, blank pages are

inserted before the last two pages of the document as needed to make the last two pages fall

on the back cover.

10. Set the Booklet Cover Source option.

Choose Auto Select to use any tray that matches the Booklet Cover Media and Booklet

Cover Media Color settings (see the following steps).

If you also set the Paper Source option (which speciﬁes the paper source for the

OTE

booklet's contents) to Auto Select, the booklet cover and its contents are printed from the

same tray. Make sure that either Booklet Cover Source or Paper Source is set to a speciﬁc

tray.

For a blank cover, choose Tray 2, Tray 3, Tray 4, or Tray 7.

For a printed cover, choose Tray 2, Tray 3, or Tray 4.

11. Set the Booklet Cover Media option.

Choose Normal or Heavyweight1A for Tray 2, Tray 3, or Tray 4.

Choose Heavyweight1B or Heavyweight2 for Tray 7.

If you select a weight other than Normal, be sure that you program a tray to that

OTE

weight at the copier before submitting the job to print.

12. Set the Booklet Cover Media Color option.

Choose White, Green, Blue, Yellow, Buff, Goldenrod, Other 1 or Other 2.

If you select a color other than White, be sure that you program a tray to that color

OTE

at the copier before submitting the job to print.

13. Set any other options necessary to print the booklet.

14. Click OK to close the Properties window, and then click OK to submit the job for printing.

Page 3