Xerox 850DX - Phaser Color Solid Ink Printer Руководство по эксплуатации - Страница 12

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Принтер Xerox 850DX - Phaser Color Solid Ink Printer. Xerox 850DX - Phaser Color Solid Ink Printer 16 страниц. Installation guide for accxes 10.2
Также для Xerox 850DX - Phaser Color Solid Ink Printer: Технические характеристики (2 страниц), Дополнительное руководство (1 страниц), Дополнительное руководство (11 страниц), Руководство по настройке (1 страниц), Инструкция по очистке Руководство (9 страниц), Дополнительное руководство (26 страниц), Примечание к выпуску (33 страниц), Примечание к выпуску (11 страниц), Примечание к выпуску (11 страниц), Инструкции по установке (2 страниц)

Technical data

The stacker must be moved by authorized personnel only .

In order to ensure that the stacker operates reliably after

moving it to a new location, consider the following guidelines:

The new location must provide minimum clearances around

the stacker. These clearances are shown in the diagram

which is located in the Technical data section of this

manual.

The flooring must be capable of supporting at least 100 lb.

(45.5 kg) for the stacker and an additional 650 lb. (295 kg)

for the attached printer.

The new location must be well ventilated and must maintain

a consistent room temperature. Extreme temperature or

humidity changes can affect the stacker.

Power source receptacles must be properly grounded.

Stacker 1000 Operator Manual

Technical data

inches (3101 mm x 2974 mm)

96 inches (2438 mm) from the floor to the

nearest overhead obstruction, within the floor space

requirements

Once installed, the Stacker 1000 can be moved

in order to access the printer media drawers.

With printer: 122 inches x 117