3Com REMOTE ACCESS SYSTEM 150 Примечание к выпуску - Страница 7
Просмотреть онлайн или скачать pdf Примечание к выпуску для Сетевое оборудование 3Com REMOTE ACCESS SYSTEM 150. 3Com REMOTE ACCESS SYSTEM 150 10 страниц. Superstack ii remote access system 1500
Печатать страницуList Connections
Command in the CLI
Using Fractional PRI
Creating A Network
Service
Refreshing Web
Configuration
Interface Data
Configuring Users
Once you have reassigned an IP address for your RAS 1500, use the
default user name "Admin" and the default password "Password"
when you configure features through the Web Configurator. You are
prompted to enter this user name and password when you select the first
feature, from the menu of features, that you want to configure. Both the
default user name and password will be overwritten once you set your
own unique manager user name and password. The user name must be
between 1 and 32 alphanumeric, nonblank characters and is
case-sensitive. The password must be between 1 and 15 characters and is
not case-sensitive.
Sometimes a
list connections
Interface) will scroll information. If this occurs, press <CTRL-C> to refresh
the screen.
If you are using fractional PRI, obtain from your telco, information on the
PRI line and the channels that are associated with that line. Configure a
specific modem group to include only those PRI members. Do not use
modem group all.
Creating a network service automatically creates a modem group with
the same name as the network service. This could cause a problem if a
modem group already exists with the same name. The modem group will
be overwritten with new information.
In order to ensure data between device and web browser is synchronized,
refresh the data in your web browser by clicking the reload or refresh
button. Do not leave the browser open on the desktop. When
configuration is complete exit out of the browser session.
To properly change a user's configuration, follow these general steps:
1 From the Web Configuration Interface, telnet to the CLI in the Router
Unit.
2 Disable the user.
3 Make the changes to the user's configuration.
4 Enable the user.
Operational Information
command from the CLI (Command Line
7