Xerox ColorQube 8700 Справочное руководство

PDL Reference Guide for the

Xerox ColorQube 8700/8900 Color MFP

Customer Tip

CQ8700-8900

Accessing Extended Features

This document describes how to access the extended features of the ColorQube 8700/8900 Color Multifunction Printer

(MFP) in environments for which Xerox does not make a custom driver.

Note: Some of the commands and syntax used in this document requires familiarity with either PostScript (PS) or Printer

Command Language (PCL).

This document provides the Printer Description Language (PDL) commands and syntax for each feature. The following

tables are also included:

features supported by the ColorQube ColorQube 8700/8900 Color Multifunction Printer



commands to use in a PCL print job



commands to use in a PS print job



This information is not intended as a PS or PCL reference manual, but a guide for using the extended features in PS, PCL or

ASCII print jobs.

1. Refer to the Feature List for the feature you want to implement. Select the page number to jump to that page.

2. Follow the syntax listed for the command you select. Read the "Dependencies/Caveats" section. You can access features

using several methods:

 PCL or PS commands

 PJL SET commands

 Xerox specific COMMENT command.

PCL and ASCII print jobs can use PJL commands or PCL commands to access the attributes of the printer. If there is more

than one method listed to access a specific feature, determine the best method for your application and use that method.

PostScript print jobs can use Document Structuring Commands (DSC) or PS commands. If there is more than one method

listed to access a specific feature, determine the best method for your application and use that method.

In this document, both PJL COMMENT and DSC are referred to as Comment commands.

CQ8700-8900

Customer Support

July 10, 2012

Page 1