Xerox ColorQube 8900 series Справочное руководство - Страница 2

Getting Started

PCL and ASCII print jobs can use PJL commands or PCL commands to access the attributes of the device. If there is more

than one method listed to access a specific feature, determine the best method for your application and use that method.

To process all PJL COMMENT commands and DSC, enclose them with XRXBegin and XRXEnd commands.

Example for a PCL or ASCII print job:

@PJL COMMENT XRXbegin

@PJL COMMENT OID_ATT_START_SHEET OID_VAL_JOB_SHEET_NONE;

@PJL COMMENT XRXend

Example PS print job:

%%XRXbegin

%%OID_ATT_START_SHEET OID_VAL_JOB_SHEET_NONE;

%%XRXend

The first parameter of the command is an attribute followed by a value.



Comment commands must end with a semicolon except for the XRXbegin and XRXend commands.



A comment command not enclosed by XRXbegin and XRXend is NOT a Xerox specific command and is treated as a real



comment with no functional attachment to its contents.

The comment commands are specific to the ColorQube 57xx Series.



PJL SET commands are available for some features. If you choose to use these commands, do not enclose them with the

XRXBegin and XRXEnd commands.

PJL SET commands do not require a semicolon at the end of the command line.

PCL commands are available for some features. If you choose to use these commands do not enclose them with the

XRXBegin and XRXEnd commands. Refer to a PCL reference manual for more specific information regarding PCL commands.

PS commands are for some features. If you choose to use these commands, do not enclose them with the XRXBegin and

XRXEnd commands. Refer to a PS reference manual for more specific information regarding PS commands.

CQ8700-8900

Customer Support

Page 2