Xerox 2101 Руководство по началу работы - Страница 11

Просмотреть онлайн или скачать pdf Руководство по началу работы для Копир Xerox 2101. Xerox 2101 12 страниц. Digital copier/printer
Также для Xerox 2101: Информация о выпуске для клиентов (14 страниц), Руководство пользователя (22 страниц)

Xerox 2101

GETTING STARTED

If jobs in the RIP queue are merged and finishing is applied

to the merged job, not all the pages in the job may print

and/or the desired finishing may not be applied. Before

merging the jobs from the RIP queue, ensure that all the job

properties (plex, finishing, etc.) are the same for all jobs

including the final merged job.

It is recommended that jobs should be merged from the

Spool (Hold) queue. The job properties (plex, finishing, etc.)

of the merging jobs should be the same. Apply the desired

job properties to the merged job.

When using the Impose feature for a PDF job or a one page

document, if 2-up Saddle or 2-up Perfect are selected,

change the paper stock to 8.5x11 before closing

DocBuilderPro. Load 8.5x11 stock short edge feed (SEF). If

the paper stock is left at 8.5x11P, the job will fault and you

will not be able to print it.

Tray 7 Restrictions: Sheets fed from Tray 7 (Interposer) will

not be punched. Solution: Use pre-punched stock in Tray 7,

if job requires punched paper.

Feeding A4 Premier TCF heavyweight stock from Tray 7

may result in excessive paper jams.

Under the Annotations feature, the word "Circular" is

incorrect. It should be labeled "Circulate".

Under the Annotations feature, no conflict checking exists.

Pay special attention when utilizing this feature as it is

possible to "stack" annotations on top of one another.

Printer Drivers

In all Microsoft Windows printer drivers the Two-Way

Communication feature in the Installable Options tab of the

Properties window is not available. You must set Installable

Options manually as described in the Fiery EX2101 Printer

Control Getting Started document. Note that in Microsoft

Windows NT 4.0 the installable options are set in the Device

Settings tab of the Properties window.

The Macintosh version OS X uses a different method for

loading drivers than the OS 9x. Please follow the OS X

driver installation instructions.

Xerox 2101

2-3