Xerox DocuColor 240 Примечание к выпуску - Страница 21

Date and time stamps for jobs

You can print these reports:

• Job Status

• Scan Mode Settings

• Copy Mode Settings

• Network Controller Jobs Report

All jobs in Job Status, Scan Mode Settings, Copy Mode Settings use the date and time on

the copier.

The reports you can print from Network Controller Jobs Report are:

• Job History Report

• Error History Report

• Fonts List

• System Settings List

The Job History Report, Fonts List, and System Settings List use the date and time on the

Fiery. The Error History Report uses the date and time on the copier (except for error codes

from the Fiery).

Job batching

If job batching is enabled, multiple jobs received by the Fiery close together are printed as a

single job. You can control job batching through the Job Batching Delay option under More

Setup in WebTools. If this option is set to 0, job batching is disabled. If this option is

set to a non-zero value, jobs that are received within this number of seconds are batched.

If job batching is enabled:

• The job information displayed on the copier for batched jobs is not correct, because the

jobs are considered one job. Command WorkStation and the Job Log show the correct

information for the individual jobs.

• After printing is complete, the job status remains Printing until the Job Batching Delay

has expired.

• Color jobs are not batched with grayscale or black-and-white jobs.

• Jobs with the Save Fast Reprint option selected and jobs printed through the Print and

Hold command in Command WorkStation are not batched. They are always printed as

individual jobs.

Page 21

Part Number: 45045321