Xerox 850N - Phaser Color Solid Ink Printer Инструкция по очистке Руководство - Страница 9

Просмотреть онлайн или скачать pdf Инструкция по очистке Руководство для Аксессуары для принтеров Xerox 850N - Phaser Color Solid Ink Printer. Xerox 850N - Phaser Color Solid Ink Printer 9 страниц. Installation guide for accxes 10.2
Также для Xerox 850N - Phaser Color Solid Ink Printer: Технические характеристики (2 страниц), Руководство по эксплуатации (16 страниц), Дополнительное руководство (1 страниц), Дополнительное руководство (11 страниц), Руководство по настройке (1 страниц), Руководство по обновлению (8 страниц), Дополнительное руководство (26 страниц), Примечание к выпуску (33 страниц), Примечание к выпуску (11 страниц), Примечание к выпуску (11 страниц), Инструкции по установке (2 страниц)

Cleaning Phaser® 850 Printers

Cleaning for multipicks: separator pad

If the printer picks multiple sheets of paper from the upper tray, clean the separator pad.

Remove the upper media tray from the printer.

Using an alcohol-soaked cloth, gently wipe the separator pad.

Inspect the separator pad for damage to the metal edge; it should be free of dents and lie flat

against the rubber surface. If any damage is seen, the separator pad should be replaced.

Replace the upper media tray in the printer.

Cleaning for lower tray jams: paper-feed rollers

If the printer feeds paper incorrectly or feeds more than one sheet at a time from the High-Capacity

Paper Tray Assembly, and the rollers are visibly dirty, perform the following cleaning procedures.

Remove the paper tray from the High-Capacity Paper Tray Assembly. If your printer has two

assemblies, remove the tray from each one. The two paper-feed rollers for each assembly are

visible when each tray is removed.

Using an alcohol-soaked cloth, scrub the rollers thoroughly. Rotate the roller several times to

ensure proper cleaning.

Replace the paper tray in the High-Capacity Paper Tray Assembly.

9103-63

9103-22

Phaser 850 Color Printer