Xerox DocuPrint N24 Быстрая установка - Страница 5

Просмотреть онлайн или скачать pdf Быстрая установка для Аксессуары для принтеров Xerox DocuPrint N24. Xerox DocuPrint N24 10 страниц. Xerox docuprint n24: supplementary guide
Также для Xerox DocuPrint N24: Функциональное руководство (15 страниц), Руководство по снабжению (2 страниц), Технические инструкции (10 страниц)

Install the Emissions Bracket Assembly

Install the Guide Rail

At the left side of the printer, align the #1

bracket with the third hole from the front,

lift it over the printer's plastic cover panel

and hook its tab in the hole.

Make sure you install the Emissions

Bracket Assembly with the "V" shaped

edge of the bracket seal facing up. Attach

the Emissions Bracket Assembly to the

printer inserting the two thumb screws into

the holes as shown and screwing them in.

Pass the Guide Rail under the center of the

printer from left to right as shown. The left

side bracket (#1) should be at the left side

of the printer, while the right side

bracket (#2) should be at the right side of

the printer.

Make sure the Guide Rail is parallel to the

front of the printer.

CAUTION: Do not tip the printer

when you attach the Guide Rail

brackets.

At the right side of the printer, align the #2

bracket with the third hole from the front

and slide it upwards between the printer's

plastic cover panel and frame until it snaps

firmly into place.

Q u i c k I n s t a l l a t i o n / R e m o v a l G u i d e