Xerox DocuColor 240 Примечание к выпуску - Страница 5

Просмотреть онлайн или скачать pdf Примечание к выпуску для Сканер Xerox DocuColor 240. Xerox DocuColor 240 34 страницы. Printer-copier
Также для Xerox DocuColor 240: Краткое руководство по эксплуатации (47 страниц), Руководство по установке (2 страниц), Краткое руководство по эксплуатации (2 страниц), Руководство по замене оборудования (2 страниц), Руководство по настройке (6 страниц), Создание буклетов для копирования (2 страниц), Список системных настроек (2 страниц), Краткое руководство по эксплуатации (2 страниц), Краткое руководство по эксплуатации (2 страниц), Руководство для оценщиков (20 страниц), Руководство для оценщиков (18 страниц)

Печатать страницу
Xerox DocuColor 240 Примечание к выпуску
Page 5
SNMP limitations
If you change the community name or disable SNMP, WebSetup does not work. Power the
device off, then on when you make a change to the SNMP tab in More Setup.
If you disable SNMP, the automatic search for the Fiery feature in Command WorkStation,
which is based on SNMP, does not work.
If you disable SNMP, the following features are affected:
• Two-Way communication
• All Fiery applications that search for Fiery controllers using SNMP (Command
WorkStation, Remote Scan, and Downloader)
• Xerox CentreWare
• Xerox MIBs
Login Window for SNMP
After you change and save the community name, a Login window appears. To validate the
changes, enter "Admin" as the User Name and the Administrator password in Command
WorkStation as the Password.
Network
Ethernet speed
The Ethernet speed setting under Network Setup on the copier Control Panel lists two
choices that are not supported: 10BASE-TX (Full Duplex) and 100BASE-TX (Full Duplex).
It does not list a choice for a 1-Gbit speed. Use WebSetup if you want to set the speed
to 1 Gbit.
Novell network
If the Fiery is connected to the Novell server through a switch and you experience connection
problems, it might be because of the default port configuration of the switch. For example,
if you have a Cisco 2950 switch, you must configure the port connected to the Fiery and the
port connected to the Novell server as follows, to allow unimpeded traffic between the two.
interface FastEthernet0/2
switchport mode access
no ip address
spanning-tree portfast
interface FastEthernet0/6
switchport mode access
no ip address
spanning-tree portfast
Part Number: 45045321