Xerox DOCUCOLOR 12 Использование руководства - Страница 9

Просмотреть онлайн или скачать pdf Использование руководства для Сервер печати Xerox DOCUCOLOR 12. Xerox DOCUCOLOR 12 12 страниц. Carrier
Также для Xerox DOCUCOLOR 12: Технические характеристики (2 страниц), Справочное руководство (10 страниц), Краткое руководство по эксплуатации (5 страниц), Краткое руководство по эксплуатации (8 страниц), Дополнительное руководство (4 страниц), Дополнительное руководство (18 страниц), Знакомство с руководством (24 страниц)

Procedures

BIOS

O REPLACE THE

The BIOS chip is located in socket U8 on the motherboard. The BIOS chip contains

boot information, such as the startup diagnostics that the Fiery X12/Fiery X40 uses when

you power on the system.

1. Locate the BIOS chip on the motherboard (socket U8).

2. Using a PROM extractor, remove the BIOS chip from its socket on the motherboard.

3. Insert the BIOS chip provided in this kit into the socket so that the notch in the chip is

aligned with the notch in the socket.

The BIOS chip is shipped in a socket mount that helps prevent pins from bending when

installing the BIOS chip into the socket on the motherboard. If you notice any bent pins,

straighten them gently with a pair of needlenose pliers. An extra socket mount is also

provided in this kit in case any pins break during installation.

Socket notch

Pin 1

4. Reassemble the Fiery X12/Fiery X40 and complete installation (see page 6).

CHIP

BIOS chip