Direct Supply Panacea Tilt-and-Recline Chair Руководство пользователя - Страница 12
Просмотреть онлайн или скачать pdf Руководство пользователя для Инвалидное кресло Direct Supply Panacea Tilt-and-Recline Chair. Direct Supply Panacea Tilt-and-Recline Chair 20 страниц. Weight capacity 350 lbs.
Печатать страницуLap Tray
The chair has a detachable lap tray that is depth adjustable. To attach the tray:
• Pull down and rotate the release pins located under the armrests. Rotating the pins will
lock them into an "open" position (Figure 13).
• Unfold the rods from the brackets on the underside of the tray (Figure 14).
• Insert the rods into the tubes located directly underneath the arm pads (Figure 13).
• Once the tray is in the desired position, secure it into place by unlocking the release
pins. Ensure the tray is securely locked into place.
Figure 13
To remove the tray:
• Pull down and rotate the release pins located under the armrests.
• Slide the rods out from the tubes located directly underneath the arm pads.
• Once the tray is removed, fold the rods back into place on the underside of the tray.
• Rotate and release the pins back into the "closed" position.
• If the chair is equipped with a rear storage compartment, place the tray into the top
pocket of the storage compartment.
• WARNING: The chair should never be placed into a tilt position while the lap tray is in use.
• WARNING: Do not use the tray if any deformation, breakage or other defect is
discovered. The tray should be inspected regularly for any deformation, breakage,
compression, corrosion or wear.
• WARNING: The tray should be regularly cleaned and maintained to help ensure its
appearance and function.
12
Operating Instructions
(cont.)
Figure 14