Alderon Industries Oil Alert VA03 Руководство по эксплуатации, техническому обслуживанию и установке - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации, техническому обслуживанию и установке для Система безопасности Alderon Industries Oil Alert VA03. Alderon Industries Oil Alert VA03 4 страницы. Remote alarm
Печатать страницуOil Alert Remote Alarm
TM
Alarm Panel Model VA03 Operation, Maintenance
and Installation Manual
Installation of the ALARM UNIT Continued
3. Continued. If connecting to existing alarm security system or (BAS) system leave terminals + & - open and use 18
gauage 2 conductor wire to connect the existing product to terminals RC, 3A, 2A,1A (Fig. 9). When connected, replace the
access cover and pull the wire through the knockouts on the access cover (See Step #4) .
wires, route all wires away from sharp objects & internal components.
Terminals RC & 1A
High Oil or Tank Filling
Terminals RC & 2A
High Water or Alarm Tank Full
Terminals RC & 3A
Pump Overload, High Sump Level,
or High Holding Tank
Class 2, 24 VDC/VAC (50/60 HZ)
500 Milliamps MAXIMUM
NOTE: The Auxiliary Contacts on the Oil Alert Remote Alarm are Normally Open only.
4. RC is common to all Normally Open contact on terminals 3A, 2A and 1A. Use a needlenose pliers to remove the desired
"break away tabs" from the access cover (Fig. 10). Lightly pull and twist off tab (s). Replace access cover and run wires
through the "break aways" (Fig. 11)
Remove Cover To Insert 9v
Battery. Replace Yearly.
Auxiliary Contacts Inside.
Alarm Systems
Control Panels
PO Box 827
Hawley, MN 56549
(Fig. 10)
Remove Cover To Insert 9v
Battery. Replace Yearly.
Auxiliary Contacts Inside.
Float Switches
Leak Detection Systems
(218) 483-3034
Caution!
(Fig. 9)
+
- RC 3A 2A 1A
1 2 3 4
(Fig. 11)
Remove Cover To Insert 9v
Battery. Replace Yearly.
Auxiliary Contacts Inside.
Fax (218) 483-3036
www.alderonind.com
- When installing
+
- RC 3A 2A 1A
P/N
Page 3 of 4