Calford NCT688 Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Система внутренней связи Calford NCT688. Calford NCT688 12 страниц. Multi-channel fm wireless intercom

Печатать страницу

Operation

Follow these steps to prepare the stations for use.

To turn on the intercom, rotate VOLUME

clockwise until it clicks. The CHANNEL

LED lights. Set VOLUME to mid-range.

Set CHANNEL and CALLING for each

station to the appropriate channel, as follows:

* If you want all the stations to communicate

with each other at the same time. set all

stations to the same channel.

* If you want to set up separate communica

tion systems, set each station to a di erent

channel.

Calling

Follow these steps to call / talk to another

station.

SLIDE CHANNEL button to the channel of

the station you are calling.

If you are in the Kitchen (CHANNEL 3), and

wish to call the barn (CHANNEL 2).

Slide Button to channel 2 .

Press CALL. The talk indicator lights. Each

station set to the selected channel sounds

a tone.

Talking

Press and hold down TALK. The talk indicator

lights.

Speak

Then, release TALK when you ¿nish speaking

and listen for the response.

Note:

One minute after you stopped conversation,

the kitchen unit channel ( with CHANNEL 2

LED lights - ON during your talking with

CHANNEL 2) will automatically shift back to

CHANNEL 3 (This is kitchen designated

channel) as stand-by mode.

Listening

When you hear a call tone or a caller's voice,

adjust VOLUME to a comfortable listening level.

IMPORTANT NOTE:

ONLY ONE PARTY CAN TALK ON ONE

CHANNEL AT A TIME.

Monitoring

Pressing LOCK has the same e ect as holding

down TALK. Use LOCK to set the intercom

for monitoring another station's location

(such as a nursery or playroom), or when other

one-way communication is needed.

Follow these instructions to monitor another

location.

1. Press LOCK on the station in the area you

want to monitor. The talk indicator lights.

2. Listen from your station.

To release the lock, press TALK on the

monitored station, The talk indicator goes out.

Note:

A) You cannot call or talk to the locked station

while LOCK is on. Remember to release the

lock when you ¿nish monitoring.

B) The intercom will release the lock automatically

(The talk indicator goes out) after 10 hours

monitoring.

C) No LOCK function for "A" position. When you

press LOCK key, you will hear a beep

remind you that no LOCK function. If you

'to monitor a room, please slide to "B" or "C" position.

Using additional stations

You may add additional stations to the system.

Any intercom that transmits on the same

frequencies is compatible.

normal

voice.

CAUTIONS

The following suggestions will help you care for

your FM Wireless intercom so you can enjoy it

for years.

Keep the station dry, If the station gets wet,

wipe them dry immediately. Liquids might

contain minerals that can corrode the

electronic circuits.

Use and store the stations only in a normal

temperature environments. Temperature

extremes can shorten the life of electronic

devices, damage batteries, and distortor melt

plastic parts.

Handle the stations gently and carefully.

Dropping them can damage the circuit boards

and can cause the stations to work

improperly.

Keep the stations away from dust and dirt,

which can cause premature wear of parts.

tone to

need