Yamaha Clavinova CLP-725 Руководство пользователя - Страница 12
Просмотреть онлайн или скачать pdf Руководство пользователя для Музыкальный инструмент Yamaha Clavinova CLP-725. Yamaha Clavinova CLP-725 40 страниц.
Печатать страницу
Setting Up
Turning the Power On
1.
Connect the plugs of the AC adaptor in
the order shown in the illustration.
DC IN jack (page 10)
2
DC plug
AC adaptor
The shape of the plug and outlet differ depending on the
locale.
WARNING
Use the specified adaptor (page 34) only. The use of
other adaptors may result in irreparable damage to both
the adaptor and the instrument.
CAUTION
When setting up the product, make sure that the AC
outlet you are using is easily accessible. If some trouble
or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet.
NOTE
Follow this procedure in reverse order when disconnecting
the AC adaptor.
2.
Turn down the [MASTER VOLUME]
knob to "MIN."
3.
Press the [P] (Standby/On) switch to
turn the power on.
The power indicator on the button lights up to
indicate the power is on.
To adjust the volume of the entire keyboard sound,
use the [MASTER VOLUME] dial while playing the
keyboard.
12
CLP-725 Owner's Manual
AC outlet
3
Power cord
1
AC plug
Power
indicator
When you're ready to turn the power to standby,
press the [P] (Standby/On) switch again for a
second. The power indicator turns off.
CAUTION
Even when the [P] (Standby/On) switch is in the standby
status, electricity is still flowing to the instrument at a
minimum level. When not using the instrument for an
extended period of time, be sure to unplug the power
cord from the wall AC outlet.
CAUTION
Do not use this instrument at a high volume level for a
long period of time, to avoid damaging your hearing.
NOTICE
Press only the [P] (Standby/On) switch when turning the
power on. Any other operations, such as pressing the
keys, buttons or pedals may cause the instrument to
malfunction.
Auto Power Off Function
To prevent unnecessary power consumption, this
instrument features an Auto Power Off function
that automatically turns the power off if the
instrument is not operated for approximately
30 minutes.
Default setting:
While holding down [DEMO/SONG] and
[PIANO/VOICE] simultaneously, press the A#0
key to enable the function or the A0 key to disable
it.
3
You can also disable the function when turning on
the power to the instrument.
While holding down the A-1 key (the lowest key,
2
press the [P] (Standby/On) switch to turn the
instrument on. The [REC] indicator flashes three
times, indicating the Auto Power Off function has
been disabled.
Lowest key
Enabled
A#0 (Enable)
Lowest key
A0 (Disable)