Yamaha Clavinova CLP-910 Руководство пользователя - Страница 16

Просмотреть онлайн или скачать pdf Руководство пользователя для Музыкальный инструмент Yamaha Clavinova CLP-910. Yamaha Clavinova CLP-910 32 страницы. Yamaha clavinova owner's manual

Yamaha Clavinova CLP-910 Руководство пользователя
Connecting to a Personal Computer
IBM-PC/AT
Series Computer
Set to the "PC-2" position.
Mac
MIDI
PC-1
PC-2
TO HOST
HOST SELECT
• If your system doesn't work properly with the connections and settings listed above, your software may require
NOTE
different settings. Check your software operation manual and if it requires a 31,250 bps. data transfer rate, set the
HOST SELECT switch to "PC-1".
• When using the TO HOST terminal to connect to a personal computer using Windows, a Yamaha MIDI driver must
be installed in the personal computer. The Yamaha MIDI driver can be obtained at Yamaha's home page on the
World Wide Web, <http://www.yamaha.co.jp/english/xg/>.
16
CLP-910

Connecting to an IBM-PC/AT Series Computer

Connect the TO HOST connector of the Clavinova to the RS-232C port
on your IBM computer, using a standard 8-pin MINI DIN → 9-pin D-SUB
cross cable. Set the HOST SELECT switch to the "PC-2" position.
Refer to your software owner's manual for information on any
settings you might have to make on the computer side.
G "PC-2" Cable Connections
MINI DIN
8-PIN
• 8-pin mini DIN → 9-pin D-SUB cable.
• Data transfer rate: 38,400 bps.
G Connector Pin Numbers
MINI DIN 8-PIN
6 7 8
3 4
5
1
2
D-SUB 9-PIN
5
4
3
2
1
9
8
7
6
1
2
3
4
8
5
............
8 (CTS)
D-SUB
7 (RST)
9-PIN
2 (RxD)
5 (GND)
3 (TxD)