Yamaha DM 2000 Version 2 Руководство по установке - Страница 11

Просмотреть онлайн или скачать pdf Руководство по установке для Музыкальный инструмент Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 14 страниц. Version 2
Также для Yamaha DM 2000 Version 2: Руководство пользователя (44 страниц), Руководство по установке (28 страниц), Руководство по установке (22 страниц), Руководство по установке программного обеспечения (13 страниц), Руководство пользователя (1 страниц), Дополнительное руководство (4 страниц), Руководство пользователя (37 страниц), Руководство по настройке (35 страниц), Руководство по ориентации (8 страниц), Руководство по резервированию (8 страниц), Руководство пользователя (3 страниц), (Немецкий) Руководство по установке операционной системы (13 страниц)

Печатать страницу
Yamaha DM 2000 Version 2 Руководство по установке
16
Select [De-authorize], then [Have already
created unregistration code], then click [Next].
The following window opens.
17
Click [Read from file] to read the text file saved
in Step 12.
If you wrote down the PRODUCT ID and unregistration
code on a piece of paper, enter the ID and code from the
keyboard.
18
Make sure that the correct PRODUCT ID and
unregistration code are displayed, then click
[Next].
The "Start de-authorizing" message is displayed.
19
Make sure that you are prepared to access the
Internet, then click [Next].
The computer connects to the authentication server and
de-authorizes the license.
20
When de-authorization is complete, the
following window opens.
The de-authorization is now complete. You can now install
the software on another console.

Error Message List

Input errors
• PRODUCT ID is wrong.
• Registration code is wrong.
• Unregistration code is wrong.
• Access key is wrong.
→ Make sure that you have entered the correct PRODUCT
ID, registration code, unregistration code, or access key.
• Content of the file is not correct data.
→ Make sure that the text file contains the registration code,
unregistration code, or access key. The file may have been
corrupted. Save the file again.
Errors in connection to the console
• Unable to connect to the console.
→ Make sure that the power to the console is turned on and
that the console and the computer are connected via the
USB cable. If the console is in normal operation mode,
follow Step 2 on page 5 to place the console in Flash
Update mode. If the error persists, turn off and on the
power to the console and restart the installer.
• This version has already been installed. No need to
install.
→ To cancel installation, click [Do not install]. To install
and overwrite the current software, click [Reinstall].
Cancel installation if there is no problem in operating the
console.
• This application is not compatible with the console.
→ Your console does not support this Add-On Effects
package. Make sure that the console's system software is
version 2.0 or later (You don't need to check this on the
PM5D). The required system software version, however,
is different for each Add-On Effects package.
Updating the system software to the latest version may
enable you to install and use this Add-On Effects package.
• Unable to initialize license management information
in console.
• Failed to create registration code.
→ Install the software again.
• Unable to initialize license management information
in console.
→ Make sure that you are installing the software in the
console for which you obtained the registration code,
then try to install the software again.
• Access key cannot be written to console.
→ Make sure that the PRODUCT ID and access key are
correct, then try to install again.
Add-On Effects Installation Guide
11