Yamaha DX27 Руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя для Музыкальный инструмент Yamaha DX27. Yamaha DX27 25 страниц. Digital programmable algorithm synthesizer
Также для Yamaha DX27: Руководство по голосовому программированию (19 страниц), Руководство пользователя (26 страниц), Руководство пользователя (39 страниц), Руководство пользователя (25 страниц), Руководство по эксплуатации (31 страниц), Руководство пользователя (19 страниц)

CHAPTER I: SETTING UP

1. Audio Outputs

2. Speaker Switch

(0Х275 only)

3. Optional Foot

Switch

4, Optional Foot

Controller

(0Х275 only)

5. Optional BC-1

Breath Controller

6. Headphones

7. MIDI Terminals

8. Cassette

The DX27 has a single monaural audio OUTPUT jack. The line-level signal from

. this jack can be fed to an instrument amplifier, sound reinforcement mixing console

or recording console.

The DX27S has dual audio outputs: OUTPUT I and OUTPUT II. Since the 0Х275

features a true stereo Chorus effect, these outputs should be connected to separate

channels of a stereo sound system to get the best chorus sound. OUTPUT I can

be used as a monaural output if desired. Of course, there's no need to use the audio

outputs at all if you will be using the DX27S internal speaker and amplifier system.

make sure it is ON if you intend to use the internal amplifier and speaker system.

The PHONES jack accepts any standard pair of stereo headphones. The audio signal

is sent to the headphones іп mono

(DX27) or in stereo (DX27S).

Headphone

volume is controlled by the VOLUME control on the top panel.

The DIN connector end of the supplied cassette cable is plugged into the 0Х27/275

CASSETTE connector. The three plugs on the other end of the cable should be

connected

to a cassette data recorder

(the kind normally

used with personal