Yamaha Electone C-40 Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Музыкальный инструмент Yamaha Electone C-40. Yamaha Electone C-40 11 страниц. Natural sound stereo control amplifier
Также для Yamaha Electone C-40: Руководство пользователя (12 страниц), Руководство пользователя (2 страниц), Руководство (32 страниц), Руководство пользователя (12 страниц), Руководство (32 страниц)

Suggested tools:

Needle nose pliers

Pegwinder with

pin remover slot

Changing Strings on a Steel-string Acoustic

Step 1:

Loosen the string to be

replaced. Carefully pull the pin out

of the bridge using the pin remover

slot on the peg winder. You can

make this easier by pushing down

on the end of the string prior to

pulling out the pin.

You can also use a set of pliers or

wire cutters if necessary. Do this

with care, as the pliers can scratch

the guitar or mark the pin.

Note: change one string at a

time to keep the tension even on

the neck, unless you have a specific

reason to remove all of the strings.

It will also keep the bridge saddle,

which is not glued in place, from

sliding out of its slot. Do not cut the

strings off—this will jolt the neck.

If necessary they can be cut once the

string has been loosened.