Yamaha Silent Bass SLB-100 Руководство пользователя - Страница 15
Просмотреть онлайн или скачать pdf Руководство пользователя для Музыкальный инструмент Yamaha Silent Bass SLB-100. Yamaha Silent Bass SLB-100 17 страниц. Yamaha silent bass owner's manual
Также для Yamaha Silent Bass SLB-100: Руководство пользователя (18 страниц)
Печатать страницу
■ AUX IN jack
• The AUX IN jack, located on the rear of the in-
strument, can be used to connect an external ste-
reo signal source to the Silent Bass.
Connecting the audio output of a CD player,
cassette player, etc. to the instrument allows you
to play along with the external audio source.
• The AUX IN jack's signal level can be controlled
with the AUX IN level control.
• The VOLUME control is used to adjust the to-
tal level of the output signal. This signal con-
tains the AUX IN signal that is controled by the
AUX IN level control knob too.
• Before connecting the Silent Bass to any external devices, make sure that the power of all
related devices is turned OFF. Set the volume level of any external audio sources to the mini-
mum level before connecting anything. High volume settings could cause damage to the equip-
ment and your hearing.
• If a connection cord is unplugged while the power is ON, it may result in damage to the equip-
ment. The sudden shock to your ears may be great, so please use with care.
• Be careful not to step on the cord. The cord may break, equipment may be damaged, and this
may cause a substantial shock to your ears.
• The signal from the Silent Bass's output jacks must NEVER be returned to the AUX IN jack,
either directly or through external equipment. Doing so will result in feedback which may
cause damage to the internal electronics.
• When a powered speaker is connect to the
power ratings may distort due to the low frequencies produced by the instrument. For suffi-
cient headroom, used powered speakers with a power rating of 50 watts or more.
■ LINE OUT jack
• The
/LINE OUT jack located on the rear
panel provides stereo output for the Silent Bass
(the bass signal is mono while the AUX IN sig-
nal is stereo).
When a device other than headphones is used
for monitoring the instrument, use an optional
stereo phone plug cable (or monaural phone plug
cable) to connect the instrument to the audio
input jack of a bass amplifier, external powered
speaker, mixing console, etc., to listen from ex-
ternal audio equipment or recording. You can
also connect this jack to the INPUT jack on an
electronic tuner and tune the Silent Bass like an
electronic instrument using the instrument's out-
put signal.
/LINE OUT jack, speakers with inadequate
15