Yamaha Reface DX Справочное руководство - Страница 11

Просмотреть онлайн или скачать pdf Справочное руководство для Электронная клавиатура Yamaha Reface DX. Yamaha Reface DX 11 страниц.
Также для Yamaha Reface DX: Руководство по обновлению (8 страниц)

Печатать страницу

Troubleshooting

If this instrument does not behave as expected—for example, not producing the correct sound or

producing no sound at all—please refer first of all to "Troubleshooting" from your Owner's Manual

(page 46). Many issues can also be resolved by doing a Factory Reset (page 40). If any specific

issue should persist, however, please contact your Yamaha dealer or a service center (see the

back of this booklet).

Issue

The instrument

No sound is pro-

stopped producing

duced.

sound when a setting

was changed.

Notes started to play

Notes continue to

without end when a

play without end.

setting was changed.

Model(s)

Suspected cause

reface DX The carrier level is set to 0.

reface DX All carriers are turned off.

The carrier's Fixed fre-

reface DX

quency value is too low.

Rate 4 for the carrier's EG

reface DX

is too low.

Solution

Press the [LEVEL] button from the FM

section, and confirm whether the carrier

level is set to "0" . If so, increase the car-

rier level.

In Edit mode, confirm whether the carrier

is turned on or off. If the carrier is off, turn

it on and ensure that its level is suffi-

ciently high.

In Edit mode, confirm whether the carrier

mode is set to "Fixed" and the "FREQ"

value is too low. If so, increase the

"FREQ" value.

Raise Rate 4 for the EG.

Alternatively, select a different Voice to

stop the sound.

Manual Development Department

Published 05/2015 PO-A0

reface Reference Manual