Yamaha YPT-230 Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Электронная клавиатура Yamaha YPT-230. Yamaha YPT-230 48 страниц. Digital keyboard
Также для Yamaha YPT-230: Список данных (3 страниц), Руководство пользователя (50 страниц), Руководство пользователя (50 страниц), Руководство пользователя (50 страниц), Руководство пользователя (50 страниц)

Печатать страницу

Make all necessary connections BEFORE turning the power on.

Connecting headphones and

external audio equipment

You can connect the PHONES/OUTPUT jack to a set

of headphones, keyboard amplifier, stereo system,

mixer, tape recorder, or other line-level audio device

to send the instrument's output signal to that device.

The internal speakers are automatically shut off when

a plug is inserted into this jack. The PHONES/OUT-

PUT jack also functions as an external output.

NOTE

• You can set the Master equalizer (EQ) which is provided to

give you the best possible sound when listening through dif-

ferent reproduction systems. The Master equalizer (EQ) can

be set in the Function settings (page 29 Function 013).

CAUTION

• Avoid listening with the headphones at high volume for

long periods of time; doing so may not only result in ear

fatigue, it may be damaging to your hearing.

CAUTION

• To prevent damage to the speakers, set the volume of the

external devices at the minimum setting and turn power off

the devices before connecting them. Failure to observe

these precautions may result in electric shock or equip-

ment damage. Also, be sure to set the volumes of all

devices at their minimum levels and gradually raise the vol-

ume controls while playing the instrument to set the

desired listening level.

Connecting a footswitch

The sustain function lets you produce a natural sustain

as you play by pressing an optional footswitch. Plug

the Yamaha FC4 or FC5 footswitch into the SUS-

TAIN jack and use it to switch sustain on and off.

NOTE

• Make sure that the footswitch plug is properly connected to

the SUSTAIN jack before turning on the power.

• Do not press the footswitch while turning the power on. Doing

this changes the recognized polarity of the footswitch, result-

ing in reversed footswitch operation.

Turn on the power

Turn down the volume by turning the [MASTER

VOLUME] control to the left and press the [

(Standby/On) switch to turn on the power. While

playing the keyboard, adjust the volume level by using

the [MASTER VOLUME] control. Pressing the [

(Standby/On) switch again turns the power off.

CAUTION

• When using a power adaptor, even when the power is off, a

small amount of electricity is still being consumed by the

instrument. When you are not using the instrument for a long

time, make sure to unplug the AC power adaptor from the wall

AC outlet, and/or remove the batteries from the instrument.

Auto Power Off function

To prevent unnecessary power consumption, this instru-

ment features an Auto Power Off function that automati-

cally turns the power off if the instrument is not used for

approximately 30 minutes.

To disable the Auto Power Off function

While holding down the lowest key, press the [

(Standby/On) switch to turn on the power. Alternately

select "Off" in the Function settings (page 30 Func-

tion 024).

NOTE

• Any settings will be restored to the factory default settings

when the power is turned off.

PSR-E233/YPT-230 Owner's Manual

Setting Up

]