Yamaha AVENTAGE RX-A1060 Руководство по обновлению прошивки - Страница 6
Просмотреть онлайн или скачать pdf Руководство по обновлению прошивки для Приемник Yamaha AVENTAGE RX-A1060. Yamaha AVENTAGE RX-A1060 6 страниц. Network av receiver
Troubleshooting
CASE 1
Error message appeared during the update
Cause:
Method:
Firmware update doesn't start for other reasons
CASE 2
●
Receiver doesn't power up after the update.
●
Or, error message appeared when confirming the firmware version.
Recovery method using USB method:
USB port
For some reason, the receiver can't read the firmware data.
For your solution, check the following
[Update through Internet]
❏
Check Internet connection.
Your Internet connection is working by playing an Internet radio station.
(See owner's manual for details)
[Update by USB thumb drive]
❏
USB thumb drive is connected properly to the receiver.
USB thumb drive is not password protected.
❏
(AV receiver cannot read data from a security protected USB thumb drive)
Make sure the USB thumb drive is inserted before the receiver is powered on for the
❏
update.
The firmware data, R0411-xxxx.bin is stored in the root directory of the USB thumb drive.
❏
❏
There is no other data except the firmware data in the USB thumb drive.
❏
No folders are created in the USB thumb drive.
Else, retry the update by USB using another USB thumb drive.
1. Unplug the AC power cable from wall outlet.
2. Insert the USB thumb drive which has the firmware data stored inside, into the USB port
located on the front panel.
3. Press and hold the PURE DIRECT key and keep it pressed while you plug the AC power
cable back into the wall outlet again.
"
FIRM UPDATE USB
DIRECT key.
4. The update will start automatically.
5. When "
UPDATE SUCCESS
display, firmware update is completed.
Power off the receiver and remove the USB thumb drive.
6. Confirm updated firmware version.
" will appear on the front display. Then, release the PURE
" , "
" , "
PLEASE...
POWER OFF!
PURE DIRECT key
(The design may differ by models.)
" appears on the
6