Yamaha A-S3000 Руководство пользователя - Страница 18

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Yamaha A-S3000. Yamaha A-S3000 36 страниц. Integrated amplifier

Connections

■ Connecting the speakers

Remove approximately 10 mm (0.4 in) of

insulation from the end of each speaker

cable and twist the exposed wires of the

cable together to prevent short circuits.

10 mm (0.4 in)

Unscrew the knob and then insert the bare

wire into the hole.

Tighten the knob.

Caution

• When loosening the knob of the speaker terminal, do not rotate

it excessively. The knob may come off and pose the danger of

being swallowed by a child.

• Touching the speaker terminal with a metallic rack may cause

short circuit and damage this unit. When installing the unit in a

rack, maintain a sufficient clearance to prevent the speaker

terminals from touching the rack.

• To reduce the risk of electric shock, do not touch the speaker

terminal when the unit is turned on.

Hole for speaker cable:

6.0 mm (0.24 in) dia.

■ Connecting the banana plug

(Except for Europe models)

First, tighten the knob and then insert the banana

plug into the end of the corresponding terminal.

Banana plug

■ Connecting the Y-shaped lug

Unscrew the knob and then sandwich the Y-

shaped lug between the ring part and base.

Slide

Terminal screw for Y-shaped

lug: 5.0 mm (0.20 in) dia.

Tighten the knob.

Hole for banana plug:

5.5 mm (0.22 in) dia.

Y-shaped lug