Yamaha AX-596 Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Yamaha AX-596. Yamaha AX-596 19 страниц. Stereo amplifier
Также для Yamaha AX-596: Каталог продукции (44 страниц), Руководство по эксплуатации (26 страниц), Руководство по эксплуатации (26 страниц)

Connecting speakers

Connect the SPEAKERS terminals to your speakers with

the wire with the proper gauge (keep it as short as

possible). If the connections are faulty, no sound will be

heard from the speakers. Make sure that the + and –

polarity markings of the speaker wires are observed and set

correctly. If these wires are reversed, the sound will be

unnatural and lack bass.

SPEAKERS A terminals

Red: positive (+)

Black: negative (–)

Loosen the knob.

Insert the bare wire. [Remove approx.

10 mm (3/8") insulation from the speaker wires.]

Tighten the knob and secure the wire.

E-

● One or two speaker systems can be connected to this

unit. If you use only one speaker system, connect it to

either the SPEAKERS A or B terminals.

● Use speakers with the specified impedance shown on the

rear of this unit.

Caution

Do not let the bare speaker wires touch each other or

any metal part of this unit. This could damage this unit

or the speakers, or both.

SPEAKERS B terminals

Red: positive (+)

Black: negative (–)

U.S.A., Canada, Australia, China and General

models only

Banana Plug connections are also possible.

Tighten the terminal knob.

Simply insert the Banana Plug connector into the

terminal.

Loosen the knob.

Insert the bare wire.

[Remove approx.

10 mm (3/8")

insulation from the

speaker wires.]

Tighten the knob

and secure the wire.