Yamaha DSP-A970 Руководство по эксплуатации - Страница 33
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Усилитель Yamaha DSP-A970. Yamaha DSP-A970 48 страниц. Digital sound field processing amplifier
Печатать страницу
3. All sound field programs except CHURCH have two "sub-
programs" (see "2-7. DESCRIPTIONS OF THE SOUND FIELD
PROGRAMS"). The sub-programs are selected using the Parameter
+/– keys on the remote control unit. The CONCERT HALL 1
program, for example, contains the sub-programs "Hall A in Europe"
and "Hall B in Europe". When the CONCERT HALL 1 program is first
selected, the "Hall A in Europe" sub-program will be selected and
displayed on the front panel. To select "Hall B in Europe", press the
Parameter + or – key. To return to Hall A in Europe, press the
Parameter + or – key again. The same selection procedure applies to
all other programs.
The sub program selection can also be done simply by pressing the
corresponding Program Select key on the remote control.
*
When you change the sub-program by using a Program Select
key while watching the monitor screen, press a key as described
below;
If the display type is a full display, press the key of the
corresponding program once. If the display type is a simplified
display or no display, press the key twice.
2-5. MUTING THE EFFECT SOUND
The EFFECT switch on the front panel and the EFFECT ON/OFF
key on the remote control unit make it simple to compare the normal
stereo sound with the fully processed effect sound.
To mute the effect sound and monitor only the main sound, press
the EFFECT ON/OFF key or the EFFECT switch. Press the EFFECT
ON/OFF key or EFFECT switch a second time to restore normal
operation.
2-6. SUPERIMPOSED VIDEO
PROGRAM/PARAMETER DISPLAY
You can select program names and edit parameters watching
their data displayed on your video monitor screen and superimposed
over the video image as described on page 9.
1. Turn your monitor on, and press the ON SCREEN display key on
the remote control unit to call the full display mode.
2. The current program name and its parameters will be displayed
on the monitor screen. The arrow-shaped cursor points to the
currently selected parameter. Parameters are selected and edited
using the Parameter Select keys and +/– keys. (See page 40 for
details.)
31