Yamaha T4n Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Yamaha T4n. Yamaha T4n 20 страниц. Yamaha power amplifier owner's manual
Также для Yamaha T4n: Руководство пользователя (19 страниц), Руководство пользователя (15 страниц), Руководство пользователя (19 страниц)

Печатать страницу

1. Specifications

■

Rear Panel

Input connectors

• XLR3-31 type input connectors

The pins are wired as shown below (IEC 60268).

• Euroblock input connectors

These are balanced input connectors. The included

Euroblock connectors can be used to make connec-

tions here.

Mode switch

• STEREO mode

In STEREO mode, channels A and B are completely

independent.

• PARALLEL mode

In PARALLEL mode, the channel A input signal is sent

both to the channel A power amp and the channel B amp.

The Channel B input connector does not function.

• BRIDGE mode

In BRIDGE mode, channels A and B operates simul-

taneously, functioning as a single mono ampliﬁer.

GAIN switch

This switch is used when changing the Gain of the A and B

channels simultaneously.

32 dB: Setting of 32 dB

26 dB: Setting of 26 dB

DATA PORT jacks

An amp control unit, such as the ACU16-C, can be con-

nected to the DATA PORT jack for monitoring or control-

ling the ampliﬁer from the external device.

AMP ID switch

When an amp control unit, such as the ACU16-C, is con-

nected to the DATA PORT jack

used to set the ampliﬁer's ID.

SPEAKERS jacks

• 5-way binding post output jacks

• Speakon type output jacks

Speakon type cable plugs (Neutrik NL4) can be con-

nected here.

Ground screw

If you are having a problem with hum or noise, use this ter-

minal to connect to ground or connect to the chassis of the

mixer, preamp, or other device in your system.

AC IN connector

This ampliﬁer uses a NEMA L5-30 outlet.

Connect the 30 A twist-lock connectors by orienting the

locking L-shaped prong with the corresponding connector

entry, then fully insert the three prongs. Twist the plug

about 1/8 of a turn clockwise to lock the connector and

plug.

The ampliﬁer requires very high-power so that it

can demand high current from the AC service.

Connections must be properly rated for reliable

operation.

If this device is to be rack mounted and trans-

ported frequently, be sure to support the rear end

of the unit with mounting hardware that matches

the size of the rack used.

Controls and Functions

, the AMP ID can be

T5n/T4n/T3n Owner's Manual