Yamaha WXA-50 Руководство пользователя - Страница 30
Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Yamaha WXA-50. Yamaha WXA-50 46 страниц. Wireless streaming amplifier
Печатать страницу
SETTINGS (Menu)
Equalizer
Manual
Sound
Speaker Type
L/R Balance
Initial Volume
Volume
Max Volume
Subwoofer Volume
Input Trim
Input Setting
Auto Play
LED Dimmer
User Interface
Item
Setting values
Bypass / Auto /
Manual
-6.0 to 0.0 to +6.0 dB
High
(0.5 dB steps)
-6.0 to 0.0 to +6.0 dB
Mid
(0.5 dB steps)
-6.0 to 0.0 to +6.0 dB
Low
(0.5 dB steps)
Compact /
Bookshelf /
Floor standing /
In-ceiling / In-wall
-12 to 0 to +12
(steps of 1)
Mode
Off / On
Mute,
Level
-80 dB to +0.0 dB
(0.5 dB steps)
-20 dB to +0.0 dB
(0.5 dB steps)
-6.0 to 0.0 to +6.0 dB
(0.5 dB steps)
-6.0 to 0.0 to +6.0 dB
(0.5 dB steps)
Off / On / Auto
0-3
Default
Adjusts the volumes for the low-frequency, middle-frequency, and
high-frequency ranges of the audio. When this is "Auto", they stay
Auto
synchronized with the main volume and perform hearing correction
for the auditory response of the human ear.
Adjusts the volume of the high-frequency range of the audio
0.0 dB
output.
Adjusts the volume of the medium-frequency range of the audio
0.0 dB
output.
0.0 dB
Adjusts the volume of the low-frequency range of the audio output.
Adjusts the effects of features such as Bass Extension and
Adaptive EQ for optimal results depending on the speaker type.
"Compact": optimizes for small speakers.
"Bookshelf": optimizes for bookshelf speakers.
Bookshelf
"Floor standing": optimizes for large speakers that are placed on
the floor.
"In-ceiling": optimizes for speakers embedded in the ceiling.
"In-wall": optimizes for speakers embedded in walls.
Adjusts the balance of the volume between the left and right
0
speakers.
Enables/disables setting of the initial volume when the unit is
Off
turned on.
-40.0 dB
Sets the initial volume for when the unit is turned on.
Sets an upper limit for the volume levels to which the unit can be
0.0 dB
adjusted using the remote control, etc.
0.0 dB
Makes fine adjustments to the volume of the subwoofer.
0.0 dB
Compensates for volume differences between input sources.
Sets whether or not audio is automatically played back from
servers, USB devices, etc. when the unit is turned on or the input
source is switched.
"Off": always starts up with playback stopped.
"On": always begins playing back the content that was played the
different for every input source
previous time.
"Auto": begins playback if audio was currently being played back
when the unit was turned to standby.
Note
The setting value is different for every input source or service.
3
Adjusts the brightness of the LED ("3" is the brightest).
30
En
Explanation