DirectConnect DCCVTDTARLA Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Медиаконвертер DirectConnect DCCVTDTARLA. DirectConnect DCCVTDTARLA 4 страницы. Coaxial & optical digital to analog audio converter

Печатать страницу

2.0 F

EATURES

This high-performance DirectConnect

many features that enable it to perform in a superior manner. Among

those features you will find:



Easy to operate: Install in seconds with no extensive configuring



Converts coaxial

(S/PDIF

) or optical

L/R audio



Supports sampling rates at 32, 44.1, 48 and 96 KHz



Provides electromagnetic-noise-free transmission



Supports 24-bit S/PDIF incoming bit stream on left and right channels



5 volt DC@2A power supply included

3.0 P

ACKAGE

ONTENTS

Before attempting to use this DirectConnect® unit, please check the packaging

and make sure the following items are contained in the shipping carton:



DirectConnect

Digital to Analog Audio Converter



5 Volt DC Power Adapter



User's Manual

Note: Please retain the original packing material in case you need to return the unit. If you

find any items missing, contact DirectConnect

model number, serial number, and invoice available for reference when you call.

digital to analog converter has

(Toslink)

digital audio signals to analog

immediately (800.531.3224). Please have the

4 / 8

4.0 C

ONNECTION AND

PERATUION

Before installation, please make sure all devices you wish to connect have been

turned off.

1) Connect the digital audio source device

Digital to Analog Converter using appropriate optical

cables.

(Cables are optional)

* Please refer to connection diagram section below.

2) Connect the A/V Receiver or Amplifier

Converter using appropriate RCA-type R&L cable

3) Insert DC side of 5 volt power supply into this product and then connect the AC side

of the power supply into the wall outlet

Note: When connected to the optical

same time, the product will give priority to the Toslink input.

Attention: Insert / remove cables gently

4.1 P

ANEL

ESCRIPTIONS

Please study the panel drawings below and become familiar with the signal input(s),

output(s) and power requirements. Apply AC power via 5 volt power supply last.

HDMI™ Digital to Analog Audio Converter

1 – Digital Input from Source

Optical (Toslink) or Coaxial (RCA)

4.2 C

ONNECTION

IAGRAM

to the DirectConnect

(Output Source)

or coaxial

(Toslink)

to the Digital to Analog

(Input Source)

(Cable is optional)

(ideally the AC power should be surge suppressed and filtered)

and Coaxial

cables at the

(Toslink)

(RCA type)

2 – Stereo

Output

(RCA)

3 – DC Input Power

Please Note: Apply AC power via 5 volt power supply last

5 / 8

(RCA type)