Yamaha ATS-2070 Руководство пользователя - Страница 20

Просмотреть онлайн или скачать pdf Руководство пользователя для Акустическая система Yamaha ATS-2070. Yamaha ATS-2070 42 страницы. Front surround system
Также для Yamaha ATS-2070: Руководство по обновлению (7 страниц), Руководство пользователя (46 страниц), Руководство по эксплуатации (50 страниц)

Mount the unit on a wall

CAUTION

• When mounting the unit on a wall, all installation work

must be performed by a qualified contractor or dealer. The

customer must never attempt to perform this installation

work. Improper or inadequate installation could cause the

unit to fall, resulting in personal injury.

• To prevent the unit from falling, attach it to a wall

constructed of drywall (plasterboard).

• Make sure you use commercially available screws that

can support the weight of the installation (specified in Step

2 on the right). Using clamps other than specified screws,

such as short screws, nails, and two-sided tape, may

cause the unit to fall.

• Fix the cables in place where they will not become loose.

If your foot or hand accidentally gets caught on a loose

cable, the unit may fall.

• Do not lean on the unit or apply excessive force to the top

of the unit. Doing so may cause the unit to fall.

• Check that the unit is fixed securely after the installation.

Yamaha will bear no responsibility for any accidents

caused by improper installations.

Attach the mounting template on a wall and mark for

the screw holes.

Mounting template (supplied)

Tapes or thumbtacks

Remove the mounting template from the wall, then

install commercially available screws (as illustrated

below) at the points marked on the wall.

7 to 9 mm

(1/4" to 3/8")

13 to 15 mm (1/2" to 5/8")

Screw holes

4 mm (#8)

20 mm (3/4")

or more