Yamaha Aventage RX-A2040 Дополнительная информация - Страница 2

Просмотреть онлайн или скачать pdf Дополнительная информация для Акустическая система Yamaha Aventage RX-A2040. Yamaha Aventage RX-A2040 8 страниц. About dolby atmos
Также для Yamaha Aventage RX-A2040: Краткое руководство (8 страниц), Руководство по настройке (2 страниц), Руководство по простой настройке (2 страниц)

Dolby Enabled SP

Select this option when using the Dolby Enabled speakers as the presence speakers.

It utilizes sounds reflected from ceiling and lets you enjoy overhead sounds only from

speakers that are placed at the same level as traditional speakers.

• Place the Dolby Enabled speakers on top of or near the traditional speakers (front, surround or surround

back speakers). A Dolby Enabled speaker unit may be integrated into a traditional speaker. For details,

refer to the instruction manual of the Dolby Enabled speakers.

b Connecting speakers

When using two presence speakers, connect them to the F.PRESENCE (EXTRA SP1)

speaker terminals. When using four presence speakers, connect front presence

speakers to the F.PRESENCE (EXTRA SP1) speaker terminals and rear presence

speakers to the R.PRESENCE (EXTRA SP2) speaker terminals.

❑ Speaker settings

Follow the procedure below to configure the speaker setting in the "Setup" menu.

Press ON SCREEN on the remote control.

Select "Setup" ➞ "Speaker" ➞ "Manual Setup" ➞ "Configuration"

and set "Front Presence" to "Large" or "Small".

If you are using rear presence speakers, also set "Rear Presence" to

"Large" or "Small".

• It makes no difference if you select "Large" or "Small". This setting will be automatically adjusted by

YPAO.

Front presence

Rear presence

Select "Layout" and check that "Surround" is set to "Rear".

• Virtual CINEMA FRONT does not support playback of Dolby Atmos contents.

Select the presence speaker layout in "Front Presence".

If you are using rear presence speakers, also select its layout in

"Rear Presence".

• When using Dolby Enabled speakers, be sure to select "Dolby Enabled SP" before performing YPAO.

c Optimizing the speaker settings automatically (YPAO)

Refer to Owner's Manual and perform YPAO.

d Starting playback

Follow the procedure below to play back Dolby Atmos contents.

Press SUR.DECODE on the remote control repeatedly to select

"bSurround" as the surround decoder.

Start playback of the Dolby Atmos content on your video device.

• To check if the Dolby Atmos decoder is working, view the information on the front display (Audio

Decoder) or TV.

This completes all the preparations. Enjoy Dolby Atmos contents with the unit.