Yamaha YSP-3300 Обновления прошивки - Страница 6

Просмотреть онлайн или скачать pdf Обновления прошивки для Акустическая система Yamaha YSP-3300. Yamaha YSP-3300 7 страниц. Digital sound projector
Также для Yamaha YSP-3300: Краткое справочное руководство (2 страниц), Руководство пользователя (8 страниц), Руководство пользователя (49 страниц)

STEP3

ENTER FIRMWARE UPDATE MODE

Confirm that the power of YSP is off. Press and hold the [INPUT] key on the

YSP and while holding that key, power on. "ADVANCED SETUP" will appear

on the front display. Then, press [UP]/[DOWN] key to display "FW UPDATE".

After pressing [ENTER] or [RIGHT] key on the remote controller, current

version will be shown on the front display.

STEP4 Press [UP]/[DOWN] key on the remote controller, "START OK?" appears on the

YSP's front display.

Note:

Executing this update will RESET the YSP's setting, including the AUTO

SETUP (IntelliBeam) and radio station preset setting to factory default.

STEP5 START FIRMWARE UPDATE

Press [ENTER] key, "USB Update", "Connect!" will be shown on the display

and the USB update will automatically start. During the update, "Update xx%" is

showing the progress.

In case display doesn't change, power off and retry the update process again from the beginning

or check requirements. See

While update is in progress,

or switching off the power.

When completed, "Success", "Please..." and "Power off!" are displayed

repeatedly. Press the [

Disconnect USB thumb drive from the YSP.

STEP6 CONFIRM UPDATED VERSION

Press and hold the [INPUT] key and power on. "ADVANCED SETUP" will

appear on the front display. Then, press [UP]/[DOWN] keys to display "FW

UPDATE". After pressing [ENTER] or [RIGHT] key on the remote controller,

current version will be shown on the front display. To exit, power off.

If the version number doesn't match, retry the update procedure again from the beginning or

check requirements. See

Your YSP is now ready for normal use.

Perform AUTO SETUP and optimize the sound beam adjustments. (Refer to the

AUTO SETUP (Intellibeam) section on the owner's manual for details)

Firmware Update Procedure for YSP-3300/YSP-4300

INPUT

IR Sensor

Troubleshooting

DO NOT interrupt the YSP by pressing any keys

] key on the YSP to turn off the power.

Troubleshooting

Page.6 of 7

for details.