Yamaha 150FETO Руководство - Страница 13

Просмотреть онлайн или скачать pdf Руководство для Подвесной мотор Yamaha 150FETO. Yamaha 150FETO 15 страниц.

Yamaha 150FETO Руководство
LOWR
SHIMMING (REGULAR ROTATION MODELS)
(FOR USA AND CANADA)
6525
6526
6530
SELECTING THE FORWARD GEAR
SHIMS
NOTE:
Find the shim thickness (T1) by selecting
shims until the specified value (M0) is
obtained with the special tool.
1. Measure:
• Specified measurement (M)
Out of specified value (M0) → Adjust.
Specified value (M0) =
1.60 + F/100 mm
Measuring steps
(1) Calculate the specified value (M0).
NOTE:
• "F" is the deviation of the lower case
dimension from standard. It is stamped
on the trim tab mounting surface of the
lower case in 0.01-mm units. If the "F"
mark is missing or unreadable, assume an
"F" value of "0", and check the backlash
when the unit is assembled.
• If the "F" mark is negative (–), then sub-
tract the "F" value from the measure-
ment.
Example:
If "F" is "+5", then
M0 = 1.60 + (+5)/100 mm
= 1.60 + 0.05 mm
= 1.65 mm
If "F" is "–3", then
M0 = 1.60 + (–3)/100 mm
= 1.60 – 0.03 mm
= 1.57 mm
6-80
E